**投屏器如何与电脑连接？教程来啦！** 投屏器是一种可以将手机、平板或其他设备的画面投射到电脑或其他显示设备上的工具。下面，我们将详细介绍如何将投屏器与电脑进行连接。 **一、准备工作** 1. 确认投屏器型号：不同型号的投屏器可能具有不同的连接方式和功能，因此首先需要确认你的投屏器型号。 2. 准备必要的连接线：通常，投屏器会配备HDMI、USB或Type-C等连接线，确保你拥有与电脑和投屏器匹配的连接线。 **二、连接步骤** 1. 连接电源：将投屏器的电源线插入电源插座，并开启投屏器。 2. 连接电脑：使用附带的连接线将投屏器和电脑连接起来。如果是通过HDMI线连接，通常需要将HDMI线的一端插入电脑的HDMI接口，另一端插入投屏器的HDMI接口。

3. 安装驱动或软件：根据投屏器的型号和品牌，可能需要安装相应的驱动程序或软件。这些信息通常可以在产品说明书或官方网站上找到。

【音频/视频无线传输器材】4kHDMI无视频线传输器50米延长器一发多收同屏器手机电脑投屏器售价：366.80元 领券价：366.8元 邮费：0.00

4. 调整设置：在电脑上打开显示设置，选择多显示器或扩展桌面模式，这样电脑的屏幕内容就会显示在投屏器连接的显示设备上。 5. 开始投屏：打开需要投屏的设备（如手机、平板等），通过Wi-Fi或蓝牙连接到投屏器，并选择要投屏的内容。此时，电脑屏幕上就会显示相应的画面。 **三、常见问题解决** 1. 无法连接：检查连接线是否插好，确认电脑和投屏器的接口是否匹配。如果需要驱动程序或软件支持，请确保已正确安装。 2. 画面不清晰：检查连接线的质量，确保电脑和投屏器的分辨率设置相匹配。 3. 声音不同步：检查音频连接是否正常，确保音频输出设置正确。 **英文翻译**： **How to Connect a Projector to a Computer? A Guide Is Here!** A projector is a tool that can cast the screen content of a mobile phone, tablet, or other devices onto a computer or other display device. Below, we will introduce in detail how to connect a projector to a computer. **I. Preparation** 1. Confirm the projector model: Different models of projectors may have different connection methods and functions, so first confirm your projector model. 2. Prepare necessary cables: Usually, the projector is equipped with HDMI, USB, or Type-C cables, so make sure you have the matching cables for connecting to the computer and projector.

【音频/视频无线传输器材】海备思4k点对点无线h投屏器企业级dmi传输转接笔记本电脑电视新款售价：57.66元 领券价：57.66元 邮费：0.00

**II. Connection Steps** 1. Connect to power: Insert the power cord of the projector into a power socket and turn on the projector. 2. Connect to the computer: Use the attached cable to connect the projector and computer. If using an HDMI cable, insert one end into the HDMI port of the computer and the other end into the HDMI port of the projector. 3. Install drivers or software: Depending on the model and brand of the projector, corresponding drivers or software may need to be installed. These information can usually be found in the product manual or official website. 4. Adjust settings: Open the display settings on the computer, select the multi-display or extended desktop mode, so that the screen content of the computer will be displayed on the display device connected to the projector. 5. Start projection: Open the device (such as a mobile phone or tablet) that needs to be projected, connect to the projector via Wi-Fi or Bluetooth, and select the content to be projected. At this point, the corresponding image will be displayed on the computer screen. **III. Troubleshooting** 1. Unable to connect: Check if the cable is properly plugged in, confirm that the interfaces of the computer and projector are matched. If drivers or software support is required, please ensure they are installed correctly. 2. Image not clear: Check the quality of the cable, make sure that the resolution settings of the computer and projector match. 3. Audio synchronization issues: Check if the audio connection is normal and ensure that the audio output settings are correct.